Home | The Artist | Galleries | The Process | Show Listings | Purchasing | Contact Us  

Etching seems to have been developed in both Germany and Italy around the mid-1500's. Many of the best known works by some of the world's greatest artists are etchings (one thinks of Durer, Rembrandt and Goya). These masters used the inked plate as the medium through which they created their superbly detailed works of outstanding aesthetic and philosophic quality. The great etchings of the world are not reproduced drawings, but works of art deliberately created through the Intaglio Process.

Each hand-pulled etching is individually taken from a zinc plate that is crafted by the artist. To begin this process, the artist starts with a pencil detail of the image. Using a white chalk pencil, he coats the back of the drawing and then places the paper on top of the zinc plate, which has been entirely covered with a black resist covering. Next, using a sharp steel stylus, the artist etches the line, exposing the shiny metal of the plate below.

The plate is then submerged in a special acid solution, which bites the image into the zinc surface. The acid can only bite the plate in the areas where the protective ground has been removed, thus etching the desired image into the metal. This part of the process may take several days to several weeks, depending on the intricacy of the image involved.

To print the image, the plate is entirely covered with a thick, oil-based ink. The ink is then wiped off of the plate, leaving only a thin trace of the substance buried in the etched lines of the metal. This wiping of the plate lends each impression a slightly different texture, leaving some areas having a richer tonal value than others.

A museum-quality, 100% rag cotton-fiber paper is then soaked in a water bath for about 15 minutes, before beeing blotted to a semi-wet state. The artist then places the cotton paper on top of the etched, inked plate using wooden tongs (for his hands are covered in ink), being sure to carefully line up the edges of the paper with those of the plate. Three different thicknesses of felts are then placed on top of the paper, and the image is sent through a star-wheeled hand-press. At this point, the artist is in complete control of the pressure and speed at which the plate is run through.

Next, the artist removes the felts, then slowly pulls the cotton-fiber paper off the plate without blurring or shaking the still-wet impression. After the etching is set to dry on a rack, it is hand water-colored to enhance the visual aspect. Each is then matted by the artist with museum board, for maximum conservation purposes.

 

All Artfield Press images are printed on 100% cotton rag paper. Afterwards, they are mounted on an acid-free archival matting. Both the paper and the matt are registered with the Library of Congress archival standards. Many diverse matting colors are used to add emphasis to the image.

Archers & Rives are superior printmaking papers. They have been made by master craftsmen in the Archers mill in France since 1492. Archers & Rives papers are excellent for etching, dry point, woodcuts, lithographs and silk screens and are favored by discerning printmakers all over the world.